# Title: Brand New Mimaki CJV150-130 54" VIVID ORANGE (Optional White/Silver) inches PRINT/CUT Commercial Large Format Eco-Solvent Printer/ Die Cutting Plotter


## Description: 54" Brand New Mimaki with High Rez L1440 EPSON Print Head CJV150-130 54" Inch Commercial Wide Format Eco-Solvent Printer and Cutting Plotter. Epson L1440 (DX7) is the best and most reliable Print head for maximum quality in all the Series of machines, including the CJV150/200 and 300 Series Large Format machines. Available now with VIVID ORANGE or Optional White or Silver ink. Open Financing and Leasing are available. Flexible Open Financing options are available. Get pre-qualified in seconds - Start now! Trade-In Your Existing Mimaki OR Roland Vinyl Printer and Cutting Plotter to a NEW ONE For A Special Deal On UV or Eco-Solvent Mimaki Print & Cut Vinyl Machine Lease or Purchase Manufacturer Warranty and Optional Extended Service Warranty plan. The CJV150-130 is a highly versatile printer that can employ eco-solvent or dye sublimation inks to complete a variety of different application requirements. This high-precision machine accommodates production printing of all kinds. Maximum media width 54" inch Choice of eco-solvent ink or dye-sublimation ink sets Eco-solvent: 8 color options including Silver, White, Orange and Light Black inks Dye-sublimation: 6 color options including Light Blue and Light Magenta inks Even ink drying with three-way intelligent heater Incorporates Mimaki’s proprietary technologies to optimize use of standard and specialty colors Features Silver ink creates high value-added print products “Shiny silver ink” exceeds expectations SS21 silver ink’s brightness is 1.67 times greater than that of conventional silver inks.(*) Exceptional brightness means high value-added printing and mirror effect results that exceed expectations.* SS21 silver ink comparison with ES3 silver ink measured at Mimaki HQ. Metallic colors created by SS21 silver ink add value to print products with simple operations SS21’s metallic color collection contains 648 colors that are easily printed using the RIP software, RasterLink6. From the printed metallic color collection, an operator may then select a metallic color from the Illustrator swatches. Through simple operations, impressive and brilliant metallic color print products are created by SS21 silver ink. Orange and light black inks ensure faithful color representation Orange ink By using the SS21 orange ink as a process color, 94.8% of the PANTONE color chart is covered with approximate colors. Thanks to a wider gamut with the orange ink, food freshness can be simulated, and corporate colors can be faithfully represented. Light black ink SS21 light black ink and superior gray-balance control produce accurate grayscale printing without unexpected color shifts. Smooth and non-grainy skin tones and grayscale gradation are delivered. Mimaki’s superior print-image quality control technology Highly-assured inkjet technology Each ink color has its own specific gravity and viscosity. To achieve precise placement of the ink droplets onto the media, Mimaki designed an optimum waveform that allows the printhead to jet each ink color at the appropriate jetting angle without losing excellent ink droplet circularity. Moreover, various ink droplet sizes are precisely placed from the minimum size 4pl to the maximum size 35pl. Small droplets create beautiful high-resolution printing, and large droplets are very useful for high-speed printing. Thus, the CJV150 satisfies a wide range of needs including beautiful high-quality printing and productive high-speed printing. Three-way intelligent heater system optimizes the ink droplets size. When the temperature of the media is not optimized, the perfect shape and size of droplets are not appropriately adhered onto the media. A patented three-way intelligent heater is built into the CJV150, and each heater maintains the temperature appropriately to obtain high-quality printing. The details of each heater are given in Figures below. Mimaki Advanced Pass System 3 (MAPS3) delivers stable high-quality printing Generally, swath boundaries are straight lines. Therefore, a slight misalignment between boundaries causes banding or uneven color printing. MAPS3 reduces banding and uneven color printing with blurred boundaries similar to gradation printing. Quick-dry SS21 ink that achieves outstanding speed SS21 ink was developed through the concentrated knowledge and technology of Mimaki. The SS21 ink dries quickly on the media due to a good balance between ink penetration and solvent volatilization. High productivity is achieved through high-density printing at high-speed modes without blocking and bleeding. Versatile print and cut functions Continuous register mark detection The CJV150 automatically detects all register marks set by the RasterLink6 on the media, and cuts contour lines precisely by utilizing simultaneous automatic calibration. Over-cut and corner-cut functions The over-cut function ensures sharply cut edges with no residues by making a cross cut at the start and end positions of the contour cutting. The corner-cut function ensures sharply cut edges by making cross cuts at each corner.; Segment correct functions This function detects intermediate register marks and enables four-point corrections for each segment to ensure accurate contour cutting over longer-length prints, even if the image is distorted. Cut-and-print function This function prevents common problems, such as film separation and faulty cut results, by cutting the media before printing. Solutions for uninterrupted print operation Nozzle check unit (NCU) automatically detects clogged nozzles and unclogs them Clogged nozzles are detected automatically by monitoring ink droplets with sensors. When clogged nozzles are found, the nozzles are automatically cleaned. A monitoring interval is set for each print dataset at specified time intervals. The NCU reduces waste printing after the occurrence of clogged nozzles. Nozzle recovery system (NRS) for maintaining productivity Previously, when the issue was not resolved after nozzle cleaning, the printhead needed to be repaired by a technician, and printing operation had to be stopped until the maintenance work was completed. The NRS allows the printer to continue print operations without interruption by using non-defective nozzles as substitutes for defective nozzles until the technician arrives. Specifications Print head On-demand piezo head Print resolution 360dpi, 540dpi, 720dpi, 1,080dpi, 1,440dpi Ink Type/Colour Eco-solvent ink・SS21（C,M,Y,K,Lc,Lm,Lk,Or,W and Si）・BS3（C,M,Y, and K） *Only available in specific countries・BS4（C,M,Y, and K） *Only available in specific countries・ES3（C,M,Y,K,Lc,Lm, and W）Sublimation ink・Sb53（Bl,M,Y,K/Dk,Lbl, and Lm）・Sb54（Bl,M,Y,K,Lbl, and Lm） Capacity SS21: 440ml Ink cartridge / 2L Ink pack(* W and Si are provided in 220ml ink cartridges only)BS3, BS4: 600ml Ink pack / 2L Ink packES3: 440ml Ink cartridge(* W is provided in 220ml ink cartridge only)Sb53, Sb54: 440ml Ink cartridge / 2L Ink pack Ink circulation MCT (Mimaki Circulation Technology) Only applies to white and silver inks Maximum print width 1,361mm (53.6") Media Maximum width 1,371mm (54.0") Thickness 1.0mm or less Roll weight 40kg or less Interface USB 2.0, LAN for E-mail notification function Certifications VCCI class A, FCC class A, ETL UL 60950-1CE Marking (EMC, Low voltage, Machinery directive, and RoHS),CB, REACH, Energy Star, RCM(CCC is in the process of being acquired.) Power supply Single-phase (AC 100–120V / AC 220–240V) Power consumption 100V:1.44 kVA × 1 or less / 200V: 1.92 kVA × 1 or less Operational environment Temperature: 20–30 °C (68–86 °F)Humidity: 35–65% Rh (Non condensing) Weight 157kg (346 lb) Dimensions (W × D × H) 2,525mm × 700mm × 1,392mm (99"×28"×55") *The lease price is based on a $3,000 down payment.


## Product type: Print and Cut Plotters


## Vendor: MIMAKI


## Tags: Automotive, Brand_MIMAKI, Cutters, hide_price, ISP_NO_PRICE, Large Cutter, Large Format Printer, Lease 2 Own Copiers, Mimaki Printers & Cutters


## Price range: 20995.0 - 20995.0 CAD


## Link: https://www.absolutetoner.com/products/brand-new-mimaki-cjv150-130-54-inch-commercial-wide-format-printer-and-cutting-plotter


## Options 

- Title: Default Title


## Variants

- Default Title, SKU: CJV150 130, Available: yes, Inventory: 5, Delivery profile: -


## Metafields 

- description_tag: Elevate your printing with the Mimaki CJV150-130! This 54" printer & cutter delivers vibrant, high-speed prints with advanced color options and precision cutting.
- title_tag: New CJV150-130 54" Mimaki PRINT/CUT Wide Format Eco-Solvent Printer