Menu
DTF Station Prestige R2 Pro DTF Printer
Prestige R2 Pro DTF Printer / 13.78"
Your transfers, printed in-house.
Stop waiting on a supplier. The Prestige R2 Pro prints full-color transfers up to 13 inches wide, on your schedule.
Filmed at the DTF Station shop. The R2 Pro prints, a Miro 13 Max shaker powders and cures, and you press.
Watch a transfer go from film to shirt.
Filmed at the DTF Station shop. The R2 Pro prints, a Miro 13 Max shaker powders and cures, and you press.
The shaker comes in two of the four setups below. Build your setup
What owners say
★★★★★ 5.0 · verified buyers
The R2 Pro is by far the best DTF Printer I have used. Highly recommend if you are in the market for a 13″ printer.
I’m able to complete orders quickly while offering exceptional quality prints. The maintenance on my Pro is easy and hassle free.
This has been the best purchase I’ve ever made. I love the easy use of this printer.
Built to keep running between orders.
White ink that doesn't sit and settle
WIMS stirs and circulates the white ink on a timer, so the white layer under your colors stays even from one run to the next.
-
Cleans its own heads
Left on, it runs a cleaning cycle every 4 hours. It can also pause to clean at set intervals, even mid-print.
-
Guards the printheads
A head strike sensor helps keep the heads from getting damaged by the film.
-
Warns you before ink runs low
An ink alert tells you a color is getting low, so a run doesn't stop halfway.
-
Two Epson heads, 13 inch roll
Dual Epson i1600 heads print up to 13 inches wide on 14.57 inch film, straight from the roll.
Build your setup.
Pick what ships with the printer and how your team learns it. Training is required, so you choose that here too.
In the box
- ✓ Prestige R2 Pro DTF printer
- ✓ neoStampa RIP (Windows) and DTF Station Pilot
- ✓ Power cord, tools, cables, ink and feed roller parts
- ✓ Virtual training
You'll still need
- • A heat press
- • A shaker or curing oven (depending on option)
- • DTF ink, film and powder
- • A Windows PC
Prestige R2 Pro DTF Printer
Lease to own for only $170/month
Just the printer and the software to run it. Pair it with the shaker or oven you already have, or add one later.
- ✓ Prestige R2 Pro printer
- ✓ neoStampa RIP (Windows) + DTF Station Pilot
- ✓ Virtual training
- ✓ Starter ink and film
Prestige R2 Pro + Miro 13 Max Shaker
Lease to own for only $205/month
Printer plus the shaker that powders and cures in one pass. Good if you want a compact finishing step next to the printer.
- ✓ Everything in the printer-only setup
- ✓ Miro 13 Max shaker
- ✓ Virtual training
Prestige R2 Pro + Curing Oven
Lease to own for only $235/month
Printer plus a curing oven for a separate powder-and-cure step. Suits shops that already have a shaker or prefer a separate oven.
- ✓ Everything in the printer-only setup
- ✓ Curing oven
- ✓ Virtual training
Prestige R2 Pro + Shaker + Oven
Lease to own for only $258/month
The full line: print, powder, cure. Best if you're setting up a dedicated DTF area from scratch.
- ✓ Everything in the printer-only setup
- ✓ Miro 13 Max shaker
- ✓ Curing oven
- ✓ Virtual training
Before it shows up.
33.58 × 25.31 × 20.86 in
About 125 lb. Measure your table or stand first. The box is 38.18 × 26.38 × 26.38 in.
Standard 110V outlet
700W at 6.36 A. A specialist can check your circuit with you.
Windows PC only
It runs on neoStampa RIP and DTF Station Pilot, which need Windows.
Full specifications
Everything about the Prestige R2 Pro, from printheads to power, so you can plan your space and setup before it arrives.
Printing
- Printheads
- Dual Epson i1600
- Ink
- CMYK plus white, 1 liter bulk
- Resolution
- 720 × 1200
- Print width
- Up to 13 in
- Film width
- 14.57 in
Software
- RIP
- neoStampa, Windows only
- Printer software
- DTF Station Pilot
- Interface
- TCP
Size and power
- Machine
- 33.58 × 25.31 × 20.86 in, 125 lb
- Box
- 38.18 × 26.38 × 26.38 in, 143 lb
- Power
- 700W, 110V, 6.36 A
Care and uses
- White ink
- WIMS timed stirring
- Head care
- Auto clean every 4 hours when left on, interval cleaning, head strike sensor, ink alert
- Transferred Onto
- Garments, totes, hats, caps, cotton, polyester, and PU
Buyer's guide
Still deciding? Watch the buyer's guide.
Estevan from our team walks through what the R2 Pro does well, what it takes to run, and who it's right for.
Comparing printers? Watch xTool vs R2 Pro
Build your setupHelp when you need it.
I use them so often that I can’t go wrong with their products, and whenever I run into a problem, I get help right away.
Absolute Toner. In Business Since 2000.
Training comes with it
Every Prestige R2 Pro includes training, virtual or on-site. You pick it when you build your setup.
The warranty
Conditional Limited Warranty & Support: Includes a 1-year limited parts warranty on eligible non-consumable parts and a 6-month limited warranty covering up to one printhead. All warranty coverage and technical support are strictly conditional upon the exclusive use of genuine DTF Station supplies, including inks, film, and powder. Additional conditions, limitations, and exclusions apply. A specialist will review the full warranty terms with you.
Questions before you buy.
Every setup still needs a heat press and a Windows PC. With the printer on its own, you'll also need DTF ink, film and powder, plus a shaker or curing oven to finish your prints.
What heat press does the R2 Pro pair with?
The R2 Pro pairs with DTF Station's Prisma Auto and Prisma Swing heat presses.
Can I run it on a Mac?
No. The neoStampa RIP that sends your designs to the printer runs on Windows only, so plan on a Windows PC.
Does it take care of its own maintenance?
The printer handles part of it. WIMS stirs the white ink on a timer, and left on, it cleans the heads every 4 hours. You'll still have a short routine, and your specialist can walk you through it before you buy.
Virtual or on-site training — what's the difference?
Virtual works if your team is comfortable learning on a call. On-site brings the training to your shop. Your choice sets the price and affects the warranty terms, so it's worth talking through.
What does the warranty cover?
Conditional Limited Warranty & Support: Includes a 1-year limited parts warranty on eligible non-consumable parts and a 6-month limited warranty covering up to one printhead. All warranty coverage and technical support are strictly conditional upon the exclusive use of genuine DTF Station supplies, including inks, film, and powder. Additional conditions, limitations, and exclusions apply. A specialist will review the full warranty terms with you.
What happens after I reach out?
A specialist gets back to you to talk through your work, the setup that fits, and what it all costs with supplies. Nothing is ordered until you decide.
Get the setup that fits your shop
Know the real cost at your volume, with ink, film and powder counted, before you buy.
Your volumeWhat you print, how often and at what sizes.
The setup that fitsPrinter only, or with a shaker, an oven or both.
Total cost with suppliesInk, film and powder for your volume, not just the printer.
Virtual Training or on-site, and what each means for your team.
Â
- Choosing a selection results in a full page refresh.