Menu
Prestige R2 Pro DTF Station Printer Bundle (See Pricing Below)
Prestige R2 Pro DTF Printer / 13 in
Your transfers, printed in-house.
Stop waiting on a supplier. The Prestige R2 Pro prints full-color transfers up to 13 inches wide, on your schedule.
Filmed at the DTF Station shop. The R2 Pro prints, a Miro 13 Max shaker powders and cures, and you press.
Watch a transfer go from film to shirt.
The shaker comes in two of the four setups below. Build your setup
Built to keep running between orders.
White ink that doesn't sit and settle
WIMS stirs and circulates the white ink on a timer, so the white layer under your colors stays even from one run to the next.
Cleans its own heads
Left on, it runs a cleaning cycle every 4 hours. It can also pause to clean at set intervals, even mid-print.
Guards the printheads
A head strike sensor helps keep the heads from getting damaged by the film.
Warns you before ink runs low
An ink alert tells you a color is getting low, so a run doesn't stop halfway.
Two Epson heads, 13 inch roll
Dual Epson i1600 heads print up to 13 inches wide on 14.57 inch film, straight from the roll.
Build your setup.
Choose what ships with the printer and how your team learns it. Training is required, so you pick that here too.
In the box
- ✓ Prestige R2 Pro DTF printer
- ✓ neoStampa RIP (Windows) and DTF Station Pilot
- ✓ Power cord, tools, cables and feed roller parts
- ✓ Virtual training registration QR code (Free)
You'll still need
- • A heat press
- • A shaker or curing oven (depending on option)
- • DTF ink, film and powder
- • A Windows PC
Prestige R2 Pro 13" DTF Printer
Shop now $9,985.00
Just the printer and the software to run it. Pair it with the shaker or oven you already have, or add one later.
- ✓ Prestige R2 Pro printer
- ✓ Startup package (sold separately)
- ✓ neoStampa RIP + DTF Station Pilot
- ✓ Virtual training
Prestige R2 Pro 13" DTF Printer + Phoenix Air 16x20 Curing Oven Bundle
Shop now $11,450.00
Printer plus a Phoenix Air 16x20 curing oven for a separate powder-and-cure step. Suits shops that already have a shaker or prefer a separate oven.
- ✓ Prestige R2 Pro printer
- ✓ Phoenix Air 16x20 curing oven
- ✓ Startup package (sold separately)
- ✓ Virtual training
Prestige R2 Pro 13" DTF Printer + Miro 13 Max PRO Bundle (Pro Stands not included)
Shop now $13,587.00
Printer plus the Miro 13 Max PRO shaker that powders and cures in one pass. Pro stands are not included in this bundle.
- ✓ Prestige R2 Pro printer
- ✓ Miro 13 Max PRO shaker
- ✓ Startup package (sold separately)
- ✓ Virtual training
DTF Station Startup Package – For Prestige R1, R2, R2 Pro
Shop now $895.00
The accessory and supply kit for Prestige R1, R2, and R2 Pro printers. Includes the essentials to get printing right away.
- ✓ DTF Station Startup Package
- ✓ RIP software license
- ✓ Fits Prestige R1, R2, R2 Pro
- ✓ Supplies and accessories included
Looking to Buy Outright or Finance? Get a Great Deal Today!
Take advantage of competitive pricing, exclusive offers, and flexible financing options to get the equipment your business needs.
Financing is easy! Check your eligibility and potential approval amount in just seconds, or contact us for a personalized quote and business leasing options.
Ready to get started?
Call 905-326-2886 or Contact Us Online for special pricing and personalized assistance.
Before it shows up.
33.58 × 25.31 × 20.86 in
About 125 lb. Measure your table or stand first. The box is 38.18 × 26.38 × 26.38 in.
Standard 110V outlet
700W at 6.36 A. A specialist can check your circuit with you.
Windows PC only
It runs on neoStampa RIP and DTF Station Pilot, which need Windows.
Full specifications
Everything about the Prestige R2 Pro, from printheads to power, so you can plan your space and setup before it arrives.
Printing
- Printheads
- Dual Epson i1600
- Ink
- CMYK plus white, 1 liter bulk
- Resolution
- 720 × 1200
- Print width
- Up to 13 in
- Film width
- 14.57 in
Software
- RIP
- neoStampa, Windows only
- Printer software
- DTF Station Pilot
- Interface
- TCP
Size and power
- Machine
- 33.58 × 25.31 × 20.86 in, 125 lb
- Box
- 38.18 × 26.38 × 26.38 in, 143 lb
- Power
- 700W, 110V, 6.36 A
Care and uses
- White ink
- WIMS timed stirring
- Head care
- Auto clean every 4 hours when left on, interval cleaning, head strike sensor, ink alert
- Transferred Onto
- Garments, totes, hats, caps, cotton, polyester, and PU
Buyer's guide
Still deciding? Watch the buyer's guide.
Estevan from our team walks through what the R2 Pro does well, what it takes to run, and who it's right for.
Comparing printers? Watch xTool vs R2 Pro
Build your setupHelp when you need it.
I use them so often that I can’t go wrong with their products, and whenever I run into a problem, I get help right away.
Absolute Toner. In Business Since 2000.
Training comes with it
Every Prestige R2 Pro includes training, virtual or on-site. You pick it when you build your setup.
Canadian warranty
Conditional Limited Warranty & Support: Includes a 1-year limited parts warranty on eligible non-consumable parts and a 6-month limited warranty covering up to one printhead. All warranty coverage and technical support are strictly conditional upon the exclusive use of genuine DTF Station supplies, including inks, film, and powder. Additional conditions, limitations, and exclusions apply. A specialist will review the full warranty terms with you.
Questions before you buy.
Every setup still needs a heat press and a Windows PC. With the printer on its own, you'll also need DTF ink, film and powder, plus a shaker or curing oven to finish your prints.
What heat press does the R2 Pro pair with?
The R2 Pro pairs with DTF Station's Prisma Auto and Prisma Swing heat presses.
Can I run it on a Mac?
No. The neoStampa RIP that sends your designs to the printer runs on Windows only, so plan on a Windows PC.
Does it take care of its own maintenance?
The printer handles part of it. WIMS stirs the white ink on a timer, and left on, it cleans the heads every 4 hours. You'll still have a short routine, and your specialist can walk you through it before you buy.
Virtual or on-site training — what's the difference?
Virtual works if your team is comfortable learning on a call. On-site brings the training to your shop. Your choice sets the price and affects the warranty terms, so it's worth talking through.
What does Canadian warranty cover?
Conditional Limited Warranty & Support: Includes a 1-year limited parts warranty on eligible non-consumable parts and a 6-month limited warranty covering up to one printhead. All warranty coverage and technical support are strictly conditional upon the exclusive use of genuine DTF Station supplies, including inks, film, and powder. Additional conditions, limitations, and exclusions apply. A specialist will review the full warranty terms with you.
What happens after I reach out?
A specialist gets back to you to talk through your work, the setup that fits, and what it all costs with supplies. Nothing is ordered until you decide.
Get the setup that fits your shop
Know the real cost at your volume, with ink, film and powder counted, before you buy.
Your volume
What you print, how often and at what sizes.
The setup that fits
Printer only, or with a shaker, an oven or both.
Total cost with supplies
Ink, film and powder for your volume, not just the printer.
Training
Virtual or on-site, and what each means for your team.
- Choosing a selection results in a full page refresh.