Multi-tool head reduces tool changes. Four tools can be used simultaneously, increasing machining variation and reducing the number of changes. In addition to the pen unit (eccentric cutter), three types of tools from a selection of nine varieties can be mounted on the head at the same time. Pen, reciprocating, V-cut, and creasing tools can be mounted simultaneously, increasing the possible variations and reducing the frequency of tool changes.
Pressure and position controls. Two types of controls are selectable: a pressure control with a maximum of 30 kg (294 N), and a position control that enables high-quality cutting and ruled lining. The ball screw on the Z-axis allows pressures from 5 to 30 kg (49 to 294 N). The cutting process is performed in position-controlled mode, which enables high-quality cuts with less blade breakage over multiple cuts. Two processing modes can be selected for ruled lining: pressure-controlled mode and position-controlled mode, depending on the material.
More accurate cutting. Based on the pre-measured flatness information of the table surface, the tool height is automatically adjusted according to the table position to reduce the occurrence of over-cutting and left-over cutting. It also reduces cutting into – and extends the life of – the cutting mat.
Backside cutting mode enables accurate cutting and ruled lining. The patent-pending backside cutting mode is available when combined with the optional camera unit. The system uses the camera unit to recognize registration marks printed on the surface and material edges, reverses the material, recognizes the edges, and applies corrections based on the data-specified locations for processing. It is useful for low-surface incision cuts and ruled lining cardboard, and for V-cuts to create seamless edges on fixtures.
Designed to pair with JFX UV-LED Series flatbed printers
Mimaki JFX600-2531
The CFX Series of flatbed cutters are ideally paired with a JFX Series printer for print then cut production of sign and graphics applications such as POP displays, labels/decals, signboards, event displays and fixtures, as well as folding cartons and cardboard processing, and other industrial cutting applications.
Specifications
| Effective Plotting Area |
CFX-2513: 100″ x 51″ (2450 x 3000 mm)
CFX-2531: 100″ x 126″ (2450 x 3190 mm)
CFX-2550: 100″ x 200″ (2450 x 5080 mm)
|
| Maximum Media Width |
CFX-2513: 101″ x 74.4″ (2570 x 1890 mm)
CFX-2531: 101″ x 149″ (2570 x 3780 mm)
CFX-2550: 101″ x 223″ (2570 x 5670 mm)
|
| Maximum Media Thickness |
E35: 2.13″ (54 mm) E60: 2.13″ (54 mm), V45: 0.79″ (20 mm) VAS: 0.79″ (20 mm)
FBT: 0.39″ (10 mm) C16: 2.13″ (54 mm), C26: 2.13″ (54 mm) C60: 0.79″ (20 mm)
|
| Maximum Media Weight |
10.24 lb/ft2 (50 kg/m2 or less)
|
| Maximum Movement Speed |
3.3ft/s (1,000mm/s)
|
| Maximum Acceleration |
0.7 G
|
| Maximum Cut pressure (Metric grams) |
66 lbs (30kg)
|
| Static Accuracy*1 |
| Repeat accuracy: ±0.03 mm, Distance accuracy: ±0.1 mm, |
| Squareness: ±0.5 mm /1000 mm, Origin repeatability: ±0.15 mm |
*1. Accuracy in pen writing with little or no load. Guaranteed temperature range is 68 to 77ºF (20 to 25ºC).
|
| Cutter Types |
Pen/swivel, Tangential, High-pressure Tangential, Reciprocating and Routing
|
| Interface |
RS-232C, Ethernet
|
| Power supply |
200 V to 240 V single phase 50/60 Hz 12VA or less
|
| Power consumption |
3,000 w
|
| Operational Environment |
Operational Temperature 41° – 86° F
Operational Humidity: 35–75 % RH (Non condensing)
Accuracy guaranteed temperature: 68 to 77ºF (20 to 25ºC), Accuracy guaranteed relative humidity: 35 to 65% Rh Temperature gradient: ±50ºF/h (10ºC/h) or less
|
| Dimensions (W × D × H) |
CFX-2513: 159.5″ x 84.6″ x 49.2″ (4050 × 2150×1250 mm)
CFX-2531: 159.5″ x 159.5″ x 49.2″ (4050 × 4050×1250 mm)
CFX-2550: 159.5″ x 234.3″ x 49.2″ (4050 × 5950×1250 mm)
|
| Weight |
CFX-2513: 838 lbs. (380 kg)
CFX-2531: 1279 lbs. (580 kg)
CFX-2550: 1720 lbs. (780 kg)
|
| Certifications |
VCCI Class, FCC Class A, CE marking, CB report (EN62368) UL62368-1, Machinery Directive RoHS, REACH
|
